LED Rechargeable Cabinet Hand Wave Light

6063 Aluminum profile + PC Cover
Battery operated led cabinet light, no need any wire outlet.
No need to wipe your hands and turn a knob on a shelf light remote, just wave your hand near to control on or off.
Super bright, long-lasting, and easy to use. Plus, eco-friendly and affordable.
High level of energy efficiency.
Continuously line color, no dot.

Send email to us

Product Detail

Product Tags

Part number	Emitting Color	Size	Watt	Lumen	Battery	Work Current
HS-12cm-WW/PW/CW	WW/PW/CW	120x40x9mm	0.6W	40lm	300mA	170mA
HS-23cm-WW/PW-CW	WW/PW/CW	230x40x9mm	1.1W	90lm	1100mA	290mA
HS-40cm-WW/PW/CW	WW/PW/CW	400x40x9mm	2W	170lm	1500mA	500mA
HS-60cm-WW/PW/CW	WW/PW/CW	600x40x9mm	2.6W	220lm	2200mA	720mA
HS-80cm-WW/PW/CW	WW/PW/CW	800x40x9mm	3.3W	270lm	3000mA	880mA

Note:

1. CRI>80.
2. Delay time: 20S +/- 2S.
3. Sensor method: Hand Wave.
4. Sensor degree: 120degree.
5. Sensor distance: Within 5-8cm.
6. Work voltage: 5V
7. Always brightness: about 3hours； Wave Sensor: 1-2month.

Product introduction:

The product uses the occlusion or reflection of the detected object to the light beam, and selects the power circuit from the synchronous circuit, so as to detect whether the object exists. The object body is not limited to metal, and all objects that can reflect light can be detected. Photoelectric switch will input current on the transmitter into light signal injection, receiver and then according to the intensity of the received light or have no detection of the target object, so as to control the LED lamp on and off.

Product Feature:

1. Using the high quality LEDs,the lighting is soft and comfortable.
2. Non-contact reflective induction, intelligent detection of close reflective objects, automatic switching of working state.
3. Easy to installl,no screws are required,it can be directly attached to the magnet for adsorption.
4. three working modes:OFF/ON/AUTO Switch.
5. Sensor mode: Red color, charging; Green color, full when you charging the lamp.